Domino Gx-OEM, Product Manual

Page: 13 / 198

Spillages and Disposal
WARNING Flammable material. Risk of fire.
Do not allow ink to dry or allow any build
‑
up of dried ink.
Some dried inks are highly flammable. Clean up all ink spillages immediately.
Spillages must be cleaned up as soon as possible with the appropriate solvent materials and
with regard to the safety of personnel. Care must be taken to prevent spillages or residue from
cleaning up entering drains or sewage systems.
Inks and associated fluids are materials that conduct electricity. Therefore, the power to the
controller must be switched off while spillages are being cleaned up.
Printing inks and associated fluids must not be treated as ordinary waste. They must be
disposed of using approved methods according to local regulations.
ELECTRO-STATIC DISCHARGE
To avoid static discharge from production line equipment, the equipment and everything on it
must be grounded correctly. While it is not Domino's responsibility to maintain the customer's
equipment, the customer must be aware of the importance of grounding. At the time of
installation of the printer, the Domino (or Domino distributor) technician should ensure that the
line the printer is installed on is appropriately grounded. This means that all metallic items within
12 inches (300mm) of the print head location must be securely grounded. This should be
checked with respect to the print head chassis ground using an Ohm Meter, DVM or another
suitable device. It is essential that grounding is checked periodically and that if the printer is
relocated to a different production line, then the new production line is properly grounded.
Additional static dissipating devices, such as static brushes on the line, etc. are recommended.
PRODUCT/BATTERY END OF LIFE
WARNING Flammable material. Risk of fire or explosion.
Do not dispose of the battery in a fire, hot oven, by mechanically crushing or
cutting.
Obey local waste regulations when disposing of batteries.
Do not store or leave the battery in high or low extremes of temperature .
Do not store or leave the battery in a location that is subject to low air
pressure at high altitudes .
CAUTION Hazardous Material. Risk of damage to equipment and environment.
The battery is not removable.If the battery needs replacement, replace the PCB
that the battery is installed on. Obey local waste regulations when disposing of
the battery and PCB.
Contents
EPT053091 - Issue 5 - 07 May 2021 8