Dodge Challenger 2018 Owner'S Manual Download Page 155 | Manualshive

Page: 155 / 512

background image

pets be restrained in the rear seat (if equipped) in pet

harnesses or pet carriers that are secured by seat belts, and

cargo is properly stowed.
BeltAlert can be activated or deactivated by your autho-

rized dealer. FCA US LLC does not recommend deactivat-

ing BeltAlert.
NOTE:

If BeltAlert has been deactivated and the driver or

outboard front seat passenger (if equipped with outboard

front passenger seat BeltAlert) is unbuckled the Seat Belt

Reminder Light will turn on and remain on until the driver

and outboard front seat passenger seat belts are buckled.
Lap/Shoulder Belts
All seating positions in your vehicle are equipped with

lap/shoulder belts.
The seat belt webbing retractor will lock only during very

sudden stops or collisions. This feature allows the shoulder

part of the seat belt to move freely with you under normal

conditions. However, in a collision the seat belt will lock

and reduce your risk of striking the inside of the vehicle or

being thrown out of the vehicle.

WARNING!

•

Relying on the air bags alone could lead to more
severe injuries in a collision. The air bags work with
your seat belt to restrain you properly. In some
collisions, the air bags won’t deploy at all. Always
wear your seat belt even though you have air bags.

•

In a collision, you and your passengers can suffer
much greater injuries if you are not properly buckled
up. You can strike the interior of your vehicle or
other passengers, or you can be thrown out of the
vehicle. Always be sure you and others in your
vehicle are buckled up properly.

•

It is dangerous to ride in a cargo area, inside or outside
of a vehicle. In a collision, people riding in these areas
are more likely to be seriously injured or killed.

•

Do not allow people to ride in any area of your
vehicle that is not equipped with seats and seat belts.

•

Be sure everyone in your vehicle is in a seat and
using a seat belt properly. Occupants, including the
driver, should always wear their seat belts whether
or not an air bag is also provided at their seating
position to minimize the risk of severe injury or
death in the event of a crash.

(Continued)

5

SAFETY

153

«
...
153
154
155
156
157
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

FRONT HEADLIGHT LENS COVER

Brand: Bimmer Jakes Pages: 4

21 COVERT Series

Brand: Code 3 Pages: 16

Brand: Trailboss Pages: 5

WrapAround Windjammer

Brand: Bestop Pages: 7

Brand: Whispbar Pages: 15

Brand: Mercedes-Benz Pages: 54

Brand: Nav TV Pages: 4

Brand: SuperATV Pages: 7

Brand: AEM Pages: 27

Brand: ULTIMATE SPEED Pages: 34

Brand: DFI Pages: 6

Brand: Maserati Pages: 302

Brand: GReddy Pages: 12

Brand: S&B Filters Pages: 4

Brand: Mazda Pages: 3

Brand: V8 equipment Pages: 34

Brand: Volvo Pages: 362

Brand: QA1 Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands