Dodge Challenger 2018 Owner'S Manual Download Page 131 | Manualshive

Page: 131 / 512

background image

To enter the “Partial Off” mode, momentarily push the

“ESC Off” switch and the “ESC Off Indicator Light” will

illuminate. To turn the ESC on again, momentarily push

the “ESC Off” switch and the “ESC Off Indicator Light”

will turn off.

WARNING!

When in “Partial Off” mode, the TCS functionality of
ESC, (except for the limited slip feature described in
the TCS section), has been disabled and the “ESC Off
Indicator Light” will be illuminated. When in “Partial
Off” mode, the engine power reduction feature of TCS
is disabled, and the enhanced vehicle stability offered
by the ESC system is reduced.

NOTE:

•

For vehicles with multiple partial ESC modes a momen-

tary button push will toggle the ESC mode. Multiple

momentary button pushed may be required to return to

ESC On.

•

Trailer Sway control (TSC) is disabled when the ESC

system is in the “Partial Off” mode.

•

If Equipped —

⬙

ESC Sport

⬙

and

⬙

ESC Track

⬙

are ESC

partial off mode(s).

Full Off – If Equipped

This mode is intended for off-highway or off-road use only

and should not be used on any public roadways. In this

mode, TCS and ESC features are turned OFF. To enter the

“Full Off” mode, push and hold the “ESC Off” switch for

five seconds while the vehicle is stopped with the engine

running. After five seconds, a chime will sound, the “ESC

Off Indicator Light” will illuminate, and the “ESC OFF”

message will display in the instrument cluster. To turn ESC

ON again, momentarily push the “ESC Off” switch.

WARNING!

•

In the ESC “Full Off” mode, the engine torque
reduction and stability features are disabled. There-
fore, enhanced vehicle stability offered by the ESC
system is unavailable. In an emergency evasive ma-
neuver, the ESC system will not engage to assist in
maintaining stability. ESC “Full Off” mode is in-
tended for off-highway or off-road use only.

•

With the ESC switched off, the enhanced vehicle
stability offered by ESC is unavailable. In an emer-
gency evasive maneuver, the ESC system will not
engage to assist in maintaining stability. ESC “Full

(Continued)

5

SAFETY

129

«
...
129
130
131
132
133
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: Lancia Pages: 191

Brand: Uniden Pages: 16

Brand: Uniden Pages: 20

Brand: PullRite Pages: 10

Brand: AutoWatch Pages: 4

Brand: Chevrolet Pages: 412

Brand: SCC Pages: 4

Brand: Hyundai Pages: 19

Brand: Subaru Pages: 298

2011 SRX CROSSOVER

Brand: Cadillac Pages: 416

Brand: TIE DOWN Pages: 2

MagicSpeed MS900

Brand: Waeco Pages: 120

Brand: true-i Pages: 11

Brand: SIXTOL Pages: 32

Brand: Volvo Pages: 286

Aura Mobile BT MCP-2014

Brand: Spracht Pages: 2

Brand: Quadratec Pages: 8

84 64 0 025 810

Brand: BMW Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands