Dodge Challenger 2018 Owner'S Manual Download Page 257 | Manualshive

Page: 257 / 512

background image

Common Towing Definitions

The following trailer towing related definitions will assist

you in understanding the following information:
Gross Vehicle Weight Rating (GVWR)
The GVWR is the total allowable weight of your vehicle.

This includes driver, passengers, cargo and tongue weight.

The total load must be limited so that you do not exceed

the GVWR. Refer to “Vehicle Loading/Vehicle Certification

Label” in “Starting And Operating” for further informa-

tion.
Gross Trailer Weight (GTW)
The GTW is the weight of the trailer plus the weight of all

cargo, consumables, and equipment (permanent or tempo-

rary) loaded in or on the trailer in its

⬙

loaded and ready for

operation

⬙

condition.

The recommended way to measure GTW is to put your

fully loaded trailer on a vehicle scale. The entire weight of

the trailer must be supported by the scale.
Gross Combination Weight Rating (GCWR)
The GCWR is the total allowable weight of your vehicle

and trailer when weighed in combination.

Gross Axle Weight Rating (GAWR)
The GAWR is the maximum capacity of the front and rear

axles. Distribute the load over the front and rear axles

evenly. Make sure that you do not exceed either front or

rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica-

tion Label” in “Starting And Operating” for further infor-

mation.

WARNING!

It is important that you do not exceed the maximum
front or rear GAWR. A dangerous driving condition
can result if either rating is exceeded. You could lose
control of the vehicle and have a collision.

Tongue Weight (TW)
The tongue weight is the downward force exerted on the

hitch ball by the trailer. You must consider this as part of

the load on your vehicle.
Trailer Frontal Area
The frontal area is the maximum height multiplied by the

maximum width of the front of a trailer.

6

STARTING AND OPERATING 255

«
...
255
256
257
258
259
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: AccuAir Pages: 40

Brand: Peak Pages: 10

Brand: Prorack Pages: 14

Brand: Saab Pages: 288

Brand: Sunsky Pages: 9

Brand: Prorack Pages: 20

2010 MX-5 Miata

Brand: Mazda Pages: 8

RAV-4 2015 Series

Brand: Toyota Pages: 50

MagicSpeed MS900

Brand: Waeco Pages: 120

Brand: Grillo Pages: 71

Brand: RAM Pages: 5

Brand: Rigid Hitch Pages: 2

80-485-142401-RT

Brand: Classic Accessories Pages: 14

Brand: Jeep Pages: 223

SH-TENT-GRAY-AHT125

Brand: SAN HIMA Pages: 11

Brand: CHINT Pages: 6

Brand: Lance Pages: 132

Brand: BOSSCO Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands