Dodge Challenger 2018 Owner'S Manual Download Page 245

Page: 245 / 512

ParkSense Warning Display

The ParkSense Warning screen will only be displayed if

“Sound and Display” is selected from the Customer -

Programmable Features section of the Uconnect System.

Refer to

⬙

Uconnect Settings” in “Multimedia” for further

information.
The ParkSense Warning screen is located within the instru-

ment cluster display. It provides visual warnings to indi-

cate the distance between the rear fascia/bumper and the

detected obstacle. Refer to “Instrument Cluster Display” in

“Getting To Know Your Instrument Panel” for further

information.

ParkSense Display

When the vehicle is in REVERSE, and an obstacle has been

detected, the warning display will turn on indicating the

system status.
The system will indicate a detected obstacle by showing a

single arc in one or more regions based on the obstacle’s

distance and location relative to the vehicle.
If an obstacle is detected in the center rear region, the

display will show a single solid arc in the center rear region

and will produce a one-half second tone. As the vehicle

moves closer to the obstacle, the display will show the

single arc moving closer to the vehicle and the sound tone

will change from slow, to fast, to continuous.
If an obstacle is detected in the left and/or right rear

region, the display will show a single flashing arc in the left

and/or right rear region and will produce a fast sound

tone. As the vehicle moves closer to the obstacle, the

display will show the single arc moving closer to the

vehicle and the sound tone will change from fast to

continuous.

Single 1/2 Second Tone/Solid Arc

STARTING AND OPERATING 243

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands