Dodge Challenger 2018 Owner'S Manual Download Page 392

Page: 392 / 512

While operating on gasoline with the required octane

number, hearing a light knocking sound from the engine is

not a cause for concern. However, if the engine is heard

making a heavy knocking sound, see your dealer immedi-

ately. Use of gasoline with a lower than recommended

octane number can cause engine failure and may void or

not be covered by the New Vehicle Limited Warranty.
Poor quality gasoline can cause problems such as hard

starting, stalling, and hesitations. If you experience these

symptoms, try another brand of gasoline before consider-

ing service for the vehicle.

6.4L Engine

Do not use E-85 flex fuel or ethanol blends greater than

15% in this engine.

This engine is designed to meet all emis-

sion regulations, provide optimal fuel

economy and performance when using

high-quality unleaded “Premium” gaso-

line having a posted octane number of

91 as specified by the (R+M)/2 method.

The use of 91 or higher octane “Pre-

mium” gasoline is required for in this engine.

While operating on gasoline with the required octane

number, hearing a light knocking sound from the engine is

not a cause for concern. However, if the engine is heard

making a heavy knocking sound, see your dealer immedi-

ately. Use of gasoline with a lower than recommended

octane number can cause engine failure and may void or

not be covered by the New Vehicle Limited Warranty.
Poor quality gasoline can cause problems such as hard

starting, stalling, and hesitations. If you experience these

symptoms, try another brand of gasoline before consider-

ing service for the vehicle.

Reformulated Gasoline

Many areas of the country require the use of cleaner

burning gasoline referred to as “Reformulated Gasoline”.

Reformulated gasoline contains oxygenates and are specifi-

cally blended to reduce vehicle emissions and improve air

quality.
The use of reformulated gasoline is recommended. Prop-

erly blended reformulated gasoline will provide improved

performance and durability of engine and fuel system

components.

390 TECHNICAL SPECIFICATIONS

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands