Dodge Challenger 2018 Owner'S Manual Download Page 434

Page: 434 / 512

Setting Name

Selectable Options

LaneSense Warning — If

Equipped

Early

Medium

Late

The “Lane Depature Warning (LDW)” setting determines at what distance the LDW system will warn you, through

steering wheel feedback, of a possible lane departure.

LaneSense Strength — If

Equipped

Low

Medium

High

Steering Feel Options — If

Equipped

Sport

Normal

Comfort

NOTE:
The Steering Feel Options feature will allow you to adjust the steering effort and feel. Press the “Sport” button on the

touchscreen to provide the greatest amount of steering feel, requiring the highest amount of steering effort. Press the

“Normal” button on the touchscreen to provide greater steering feel, requiring greater steering effort. Press the “Com-

fort” button on the touchscreen to a lesser steering feel, requiring less steering effort.

ParkSense — If Equipped

Sound Only

Sound and Display

NOTE:
The ParkSense system will scan for objects behind the vehicle when the gear selector is in REVERSE and the vehicle

speed is less than 7 mph (11 km/h). It will provide an alert (audible and/or visual) to indicate the proximity to other

objects. The system can be enabled with Sound Only, or Sound and Display.

Rear ParkSense Volume —

If Equipped

432 MULTIMEDIA

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands