Dodge Challenger 2018 Owner'S Manual Download Page 391

Page: 391 / 512

While operating on gasoline with an octane number of 87,

hearing a light knocking sound from the engine is not a

cause for concern. However, if the engine is heard making

a heavy knocking sound, see your dealer immediately. Use

of gasoline with an octane number lower than 87 can cause

engine failure and may void or not be covered by the New

Vehicle Limited Warranty.
Poor quality gasoline can cause problems such as hard

starting, stalling, and hesitations. If you experience these

symptoms, try another brand of gasoline before consider-

ing service for the vehicle.

5.7L Engine (With Automatic Transmission)

Do not use E-85 flex fuel or ethanol blends greater than

15% in this engine.

This engine is designed to meet all emis-

sions regulations and provide satisfac-

tory fuel economy and performance

when using high quality unleaded gaso-

line having a posted octane number

range of 87 to 89 as specified by the

(R+M)/2 method. The use of 89 octane

“Plus” gasoline is recommended for optimum performance

and fuel economy.

While operating on gasoline with an octane number of 87,

hearing a light knocking sound from the engine is not a

cause for concern. However, if the engine is heard making

a heavy knocking sound, see your dealer immediately. Use

of gasoline with an octane number lower than 87 can cause

engine failure and may void or not be covered by the New

Vehicle Limited Warranty.
Poor quality gasoline can cause problems such as hard

starting, stalling, and hesitations. If you experience these

symptoms, try another brand of gasoline before consider-

ing service for the vehicle.

5.7L Engine (With Manual Transmission)

Do not use E-85 flex fuel or ethanol blends greater than

15% in this engine.

This engine is designed to meet all emis-

sion regulations, provide optimal fuel

economy and performance when using

high-quality unleaded “Premium” gaso-

line having a posted octane number of

91 as specified by the (R+M)/2 method.

The use of 91 or higher octane “Pre-

mium” gasoline is required for in this engine.

TECHNICAL SPECIFICATIONS 389

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands