Dodge Challenger 2018 Owner'S Manual Download Page 454

Page: 454 / 512

G-Force

When selected, this screen displays all four G-Force values,

as well as steering angle.

When G-Force is selected, the following features will be

available:

•

Vehicle Speed:

Measures the current speed of the vehicle in either mph

or km/h, starting at zero with no maximum value.

•

Front G-Force:

Measures the braking force.

•

Right G-Force:

Measures the left turn force.

•

Left G-Forces:

Measures the right turn force.

•

Rear G-Forces:

Measures the acceleration force.
NOTE:

Front, Right, Left, and Rear G-Forces are all peak

values. These readings can be reset by clearing peak

G-Force on the instrument cluster.

G-Force

452 MULTIMEDIA

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands