Dodge Challenger 2018 Owner'S Manual Download Page 148

Page: 148 / 512

•

Driving on a significantly under-inflated tire causes the

tire to overheat and can lead to tire failure. Under-

inflation also reduces fuel efficiency and tire tread life,

and may affect the vehicle’s handling and stopping

ability.

•

The TPMS is not a substitute for proper tire mainte-

nance, and it is the driver’s responsibility to maintain

correct tire pressure using an accurate tire pressure

gauge, even if under-inflation has not reached the level

to trigger illumination of the TPM Telltale Light.

•

Seasonal temperature changes will affect tire pressure,

and the TPMS will monitor the actual tire pressure in the

tire.

Premium System
The Tire Pressure Monitor System (TPMS) uses wireless

technology with wheel rim mounted electronic sensors to

monitor tire pressure levels. Sensors, mounted to each

wheel as part of the valve stem, transmit tire pressure

readings to the receiver module.
NOTE:

It is particularly important for you to check the tire

pressure in all of the tires on your vehicle monthly and to

maintain the proper pressure.

The TPMS consists of the following components:

•

Receiver module

•

Four tire pressure monitoring sensors

•

Various tire pressure monitoring system messages,

which display in the instrument cluster

•

Tire pressure monitoring telltale light

Tire Pressure Monitoring Low Pressure Warnings

The “Tire Pressure Monitoring Telltale Light” will

illuminate in the instrument cluster and a chime

will sound when tire pressure is low in one or more of the

four active road tires. In addition, the instrument cluster

will display an “Inflate to XX” message and a graphic

showing the pressure values of each tire with the low tire

pressure values shown in a different color.

146 SAFETY

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands