Dodge Challenger 2018 Owner'S Manual Download Page 474

Page: 474 / 512

Radio

Use your voice to quickly get to the AM, FM or SiriusXM

Satellite Radio stations you would like to hear. (Subscrip-

tion or included SiriusXM Satellite Radio trial required.)
Push the VR button

. After the beep, say:

•

“ Tune to ninety-five-point-five FM”

•

“ Tune to Satellite Channel Hits 1”

TIP:

At any time, if you are not sure of what to say or want

to learn a Voice Command, push the VR button

and say

“Help.”

The system will provide you with a list of

commands.

Uconnect 4 Radio

472 MULTIMEDIA

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands