Dodge Challenger 2018 Owner'S Manual Download Page 351 | Manualshive

Page: 351 / 512

background image

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine dam-
age and may decrease corrosion protection. Organic
Additive Technology (OAT) engine coolant is differ-
ent and should not be mixed with Hybrid Organic
Additive Technology (HOAT) engine coolant (anti-
freeze) or any “globally compatible” coolant (anti-
freeze). If a non-OAT engine coolant (antifreeze) is
introduced into the cooling system in an emergency,
the cooling system will need to be drained, flushed,
and refilled with fresh OAT coolant (conforming to
MS.90032), by an authorized dealer as soon as pos-
sible.

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (anti-
freeze) is not recommended.

Adding Coolant
Your vehicle has been built with an improved engine

coolant (OAT coolant conforming to MS.90032) that allows

extended maintenance intervals. This engine coolant (anti-

freeze) can be used up to ten years or 150,000 miles

(240,000 km) before replacement. To prevent reducing this

extended maintenance period, it is important that you use

the same engine coolant (OAT coolant conforming to

MS.90032) throughout the life of your vehicle.
Please review these recommendations for using Organic

Additive Technology (OAT) engine coolant (antifreeze)

that meets the requirements of FCA Material Standard

MS.90032. When adding engine coolant (antifreeze):

•

We recommend using Mopar Antifreeze/Coolant 10

Year/150,000 Mile (240,000 km) Formula OAT (Organic

Additive Technology) that meets the requirements of

FCA Material Standard MS.90032.

•

Mix a minimum solution of 50% OAT engine coolant

that meets the requirements of FCA Material Standard

MS.90032 and distilled water. Use higher concentrations

(not to exceed 70%) if temperatures below −34°F (−37°C)

are anticipated. Please contact an authorized dealer for

assistance.

8

SERVICING AND MAINTENANCE 349

«
...
349
350
351
352
353
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: Daihatsu Pages: 485

Brand: Mazdaspeed Pages: 8

XEBRA ZAPCAR Series

Brand: Zap Pages: 16

Brand: Beper Pages: 52

Brand: Hummer Pages: 31

Brand: Westfalia Pages: 10

Brand: Mobridge Pages: 20

Brand: Magneti Marelli Pages: 9

Brand: RAM Pages: 666

PerfectView LCD350

Brand: Waeco Pages: 36

2005-2009 Chrysler 300C

Brand: Mopar Pages: 7

Brand: MMD Pages: 3

Brand: Brainz Pages: 2

Brand: Reese Pages: 21

Tipper Remote Kit

Brand: Nugent Pages: 21

Brand: Conrad Pages: 8

Brand: Porsche Pages: 1005

Brand: Baseus Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands