Dodge Challenger 2018 Owner'S Manual Download Page 108

Page: 108 / 512

Fuel Economy

Two submenu pages; one with Current Value (instanta-

neous calculation of the fuel economy) displayed and one

without the Current Value displayed (toggle the left or

right

arrow button to select one):

•

Current Fuel Economy (MPG, L/100 km, or km/l).

•

Range To Empty (miles or km).

•

Average Fuel Economy (MPG, L/100 km, or km/l).

•

The Max and Min values will correspond to the particu-

lar engine requirements.

•

Lower end of gauge will be displayed in an amber color

and turn green as Fuel Economy improves.

•

Hold the OK button to reset average fuel economy

information.

Trip Info

Push and release the up or down arrow button until the

Trip Menu item is displayed in the instrument cluster

display. Toggle the left or right arrow button to select Trip

A or Trip B. The Trip information will display the follow-

ing:

•

Distance – Shows the total distance (mi or km) traveled

for Trip A or Trip B since the last reset.

•

Average Fuel Economy – Shows the average fuel

economy (MPG, L/100km or km/l) of Trip A or Trip B

since the last reset.

•

Elapsed Time – Shows the total elapsed time of travel

since the last reset.

Hold the OK button to reset feature information.

Audio

This menu displays the Audio information of the currently

playing audio source (e.g. FM radio).

Messages

This feature shows the number of stored warning mes-

sages, if any. Pushing the right or left arrow button will

allow you to scroll through the stored messages.

106 GETTING TO KNOW YOUR INSTRUMENT PANEL

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands