Dodge Challenger 2018 Owner'S Manual Download Page 398 | Manualshive

Page: 398 / 512

background image

CAUTION!

•

Mixing of engine coolant (antifreeze) other than
specified Organic Additive Technology (OAT) en-
gine coolant (antifreeze), may result in engine dam-
age and may decrease corrosion protection. Organic
Additive Technology (OAT) engine coolant is differ-
ent and should not be mixed with Hybrid Organic
Additive Technology (HOAT) engine coolant (anti-
freeze) or any “globally compatible” coolant (anti-
freeze). If a non-OAT engine coolant (antifreeze) is
introduced into the cooling system in an emergency,
the cooling system will need to be drained, flushed,

(Continued)

CAUTION!

(Continued)

and refilled with fresh OAT coolant (conforming to
MS.90032), by an authorized dealer as soon as pos-
sible.

•

Do not use water alone or alcohol-based engine
coolant (antifreeze) products. Do not use additional
rust inhibitors or antirust products, as they may not
be compatible with the radiator engine coolant and
may plug the radiator.

•

This vehicle has not been designed for use with
propylene glycol-based engine coolant (antifreeze).
Use of propylene glycol-based engine coolant (anti-
freeze) is not recommended.

396 TECHNICAL SPECIFICATIONS

«
...
396
397
398
399
400
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: KC HiLiTES Pages: 4

Brand: Xblitz Pages: 16

BLACK STEEL S2560

Brand: Fab Fours Pages: 9

iBoard IB-ZK406

Brand: APS Auto Parts Specialist Pages: 3

Brand: Prorack Pages: 14

Brand: Condor Pages: 2

Brand: Menabo Pages: 12

Brand: Renault Pages: 340

Brand: Pyle Pages: 2

Brand: Audiovox Pages: 3

Brand: Victory 4x4 Pages: 9

Brand: Jaeger Pages: 11

Brand: Ford Pages: 585

Brand: Connects2 Pages: 8

Brand: MBRP Pages: 5

Brand: STO N SHO Pages: 7

1993 Civic Coupe

Brand: Honda Pages: 201

KY-700-2018-DRW01

Brand: FALCON RIDGE Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands