Dodge Challenger 2018 Owner'S Manual Download Page 420

Page: 420 / 512

Compass Settings — If Equipped
After pressing the “Compass Settings” button on the

touchscreen, the following settings will be available:

NOTE:

Before compass calibration is performed, the com-

pass variance zone should be set for best results.

Setting Name

Selectable Options

Compass Variance

NOTE:
When the “Compass Variance” feature is selected, it allows the compass variance to be set to any number from 1 to

15 per the compass variance zone map figure.

Compass Variance is the difference between Magnetic North and Geographic North. To compensate for the differ-

ences, the variance should be set for the zone where the vehicle is being driven, illustrated in the zone map. Once

properly set, the compass will automatically compensate for the differences when calibrated, and provide the most

accurate compass headings.

418 MULTIMEDIA

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands