manualshive.com logo in svg

Dodge Challenger 2018, Owner'S Manual

The Dodge Challenger 2018 Owner's Manual is a comprehensive guide to help you maximize the performance of your vehicle. This manual is available for free download at manualshive.com, ensuring quick access to essential information on maintenance, operations, and troubleshooting. Get your manual today to explore the full potential of your Dodge Challenger 2018.

Share
Download
background image

WARNING!

(Continued)

•

When hauling cargo or towing a trailer, do not
overload your vehicle or trailer. Overloading can
cause a loss of control, poor performance or damage
to brakes, axle, engine, transmission, steering, sus-
pension, chassis structure or tires.

•

Safety chains must always be used between your
vehicle and trailer. Always connect the chains to the
hook retainers of the vehicle hitch. Cross the chains
under the trailer tongue and allow enough slack for
turning corners.

•

Vehicles with trailers should not be parked on a
grade. When parking, apply the parking brake on the
tow vehicle. Put the tow vehicle transmission in
PARK. Always, block or

ⴖ

chock

ⴖ

the trailer wheels.

•

GCWR must not be exceeded.

•

Total weight must be distributed between the tow
vehicle and the trailer such that the following four
ratings are not exceeded:

1. Max loading as defined on the “Tire and Loading
Information” placard.

(Continued)

WARNING!

(Continued)

2. GTW
3. GAWR
4. Tongue weight rating for the trailer hitch utilized.

Perform the maintenance listed in the “Scheduled Servic-

ing”. Refer to “Scheduled Servicing” in “Servicing And

Maintenance” for the proper maintenance intervals. When

towing a trailer, never exceed the GAWR or GCWR ratings.

CAUTION!

•

Do not tow a trailer at all during the first 500 miles
(805 km) the new vehicle is driven. The engine, axle
or other parts could be damaged.

•

Then, during the first 500 miles (805 km) that a trailer
is towed, do not drive over 50 mph (80 km/h) and do
not make starts at full throttle. This helps the engine
and other parts of the vehicle wear in at the heavier
loads.

6

STARTING AND OPERATING 259

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
iArmor EDGE IA-N098 Quick Start Manual preview
EDGE IA-N098
Brand: iArmor Pages: 4
Rugged Ridge 11252.51 Installation Instructions preview
11252.51
Brand: Rugged Ridge Pages: 3
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Waeco Perfect Fit MBM120 Installation Instructions preview
Perfect Fit MBM120
Brand: Waeco Pages: 3
Or-Fab HD Bumper Installation Instructions preview
HD Bumper
Brand: Or-Fab Pages: 4

Brands by name

Popular brands

Load more brands