Dodge Challenger 2018 Owner'S Manual Download Page 167

Page: 167 / 512

Seat belts are necessary for your protection in all collisions,

and also are needed to help keep you in position, away

from an inflating air bag.
When the ORC detects a collision requiring the front air

bags, it signals the inflator units. A large quantity of

non-toxic gas is generated to inflate the front air bags.
The steering wheel hub trim cover and the upper right side

of the instrument panel separate and fold out of the way as

the air bags inflate to their full size. The front air bags fully

inflate in less time than it takes to blink your eyes. The

front air bags then quickly deflate while helping to restrain

the driver and front passenger.
Knee Impact Bolsters
The Knee Impact Bolsters help protect the knees of the

driver and front passenger, and position the front occu-

pants for improved interaction with the front air bags.

WARNING!

•

Do not drill, cut, or tamper with the knee impact
bolsters in any way.

•

Do not mount any accessories to the knee impact
bolsters such as alarm lights, stereos, citizen band
radios, etc.

Supplemental Side Air Bags
Supplemental Seat-Mounted Side Air Bags (SABs)

This vehicle is equipped with Supplemental Seat-Mounted

Side Air Bags (SABs).
Supplemental Seat-Mounted Side Air Bags (SABs) are

located in the outboard side of the front seats. The SABs are

marked with a “SRS AIRBAG” or “AIRBAG” label sewn

into the outboard side of the seats.
The SABs may help to reduce the risk of occupant injury

during certain side impacts, in addition to the injury

reduction potential provided by the seat belts and body

structure.

SAFETY

165

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands