Dodge Challenger 2018 Owner'S Manual Download Page 459

Page: 459 / 512

DRIVE MODE SET-UP

Pressing the “Drive Mode Set-Up” button on the touch-

screen within the Performance Control screen indicates the

real-time status of the various systems. Pressing the “Sport

Mode Set-Up” or “Default Mode Set-Up” buttons on the

touchscreen allows the driver to configure their individual

drive modes and see how those configurations affect the

performance of the vehicle.
NOTE:

Not all of the options listed in this manual are

available on every vehicle, below is a chart with all

available Drive Mode vehicle configurations.

Available Mode Configurations

Transmission

Auto

Engine

N/A

Engine/Trans

Steering

Paddle Shifters

Traction Control

Refer to the Sport and Default modes for their detailed

operation.
NOTE:

These settings will remain in effect when using the

Launch Control feature.

Drive Mode Set-Up

MULTIMEDIA

457

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands