Dodge Challenger 2018 Owner'S Manual Download Page 221

Page: 221 / 512

FUEL SAVER TECHNOLOGY — IF EQUIPPED

This feature offers improved fuel economy by shutting off

four of the engine’s eight cylinders during light load and

cruise conditions. The system is automatic with no driver

inputs or additional driving skills required.
NOTE:

This system may take some time to return to full

functionality after a battery disconnect.

POWER STEERING

The electric power steering system will give you good

vehicle response and increased ease of maneuverability in

tight spaces. The system will vary its assist to provide light

efforts while parking and good feel while driving. If the

electric steering system experiences a fault that prevents it

from providing assist, you will still have the ability to steer

the vehicle manually.

WARNING!

Continued operation with reduced assist could pose a
safety risk to yourself and others. Service should be
obtained as soon as possible.

Alternate electric power steering efforts can be selected

through the Uconnect System. Refer to ”Customer Pro-

grammable Features” within “Uconnect Settings” in “Mul-

timedia” for further information.

If the Electric Power Steering warning icon is

displayed and the “SERVICE POWER STEER-

ING” or the “POWER STEERING ASSIST OFF –

SERVICE SYSTEM” message is displayed within

the instrument cluster display, this indicates the vehicle

needs to be taken to the dealer for service. Refer to

“Warning Lights And Messages” in “Getting To Know

Your Instrument Panel” for further information.
NOTE:

•

Even if the power steering assistance is no longer

operational, it is still possible to steer the vehicle. Under

these conditions there will be a substantial increase in

steering effort, especially at low speeds and during

parking maneuvers.

•

If the condition persists, see your authorized dealer for

service.

STARTING AND OPERATING 219

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands