Dodge Challenger 2018 Owner'S Manual Download Page 421

Page: 421 / 512

Compass Calibration

Yes

NOTE:
Press “Compass Calibration” on the touchscreen to enter calibration. To start calibration of the compass, press the

“Yes” button on the touchscreen and complete one or more 360-degree turns (in an area free from large metal or me-

tallic objects). A message will appear on the touchscreen when the compass has been successfully calibrated.

Keep magnetic materials away from the rear view mirror, such as Mobile Phones, Laptops and Radar Detectors. This

is where the compass module is located, and it can cause interference with the compass sensor, and it may give false

readings.

Compass Variance Zone Map

MULTIMEDIA

419

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands