Dodge Challenger 2018 Owner'S Manual Download Page 275 | Manualshive

Page: 275 / 512

background image

WARNING!

•

Ignoring the Rearview Mirror light could mean you
will not have SOS Call services. If the Rearview
Mirror light is illuminated, have an authorized
dealer service the SOS Call system immediately.

•

The Occupant Restraint Control module turns on the
air bag Warning Light on the instrument panel if a
malfunction in any part of the system is detected. If
the Air Bag Warning Light is illuminated, have an
authorized dealer service the Occupant Restraint
Control system immediately.

Even if the SOS Call system is fully functional, factors

beyond FCA US LLC’s control may prevent or stop the SOS

Call system operation. These include, but are not limited

to, the following factors:

•

Delayed accessories mode is active.

•

The ignition is in the OFF position.

•

The vehicle’s electrical systems are not intact.

•

The SOS Call system software and/or hardware are

damaged during a crash.

•

The vehicle battery loses power or becomes discon-

nected during a vehicle crash.

•

LTE (voice/data) or 4G (data) network and/or Global

Positioning Satellite signals are unavailable or ob-

structed.

•

Equipment malfunction at the SOS operator facility.

•

Operator error by the SOS operator.

•

LTE (voice/data) or 4G (data) network congestion.

•

Weather.

•

Buildings, structures, geographic terrain, or tunnels.

WARNING!

ALWAYS obey traffic laws and pay attention to the
road. ALWAYS drive safely with your hands on the
steering wheel. You have full responsibility and as-
sume all risks related to the use of the Uconnect and
SiriusXM Guardian features and applications in this
vehicle. Only use Uconnect features and SiriusXM
Guardian services when it is safe to do so. Failure to do
so may result in an accident involving serious injury or
death.

7

IN CASE OF EMERGENCY 273

«
...
273
274
275
276
277
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: JANE Pages: 6

Brand: AA Products Pages: 6

Brand: Chevrolet Pages: 356

Brand: Ford Pages: 272

Brand: Pontiac Pages: 376

Brand: Jeep Pages: 712

Brand: Porsche Pages: 51

Brand: Whispbar Pages: 14

Brand: Trailboss Pages: 5

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

Brand: Volvo Pages: 188

Brand: Inbay Pages: 20

Brand: Kuda Pages: 3

Brand: Honda Pages: 4

SAFESTOP SS0005

Brand: Pro-gard Pages: 4

Brand: HAUL MASTER Pages: 8

Brand: Caltrend Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands