Dodge Challenger 2018 Owner'S Manual Download Page 143

Page: 143 / 512

the visual and audio alerts will be issued. In addition to the

audible alert the radio (if on) volume will be reduced so

that the alert can be better heard.
When the system is in RCP, the system shall respond with

both visual and audible alerts when a detected object is

present. Whenever an audible alert is requested, the radio

volume is reduced so that the alert can be better heard.
Blind Spot Alert Off

When the BSM system is turned off there will be no visual

or audible alerts from either the BSM or RCP systems.
NOTE:

The BSM system will store the current operating

mode when the vehicle is shut off. Each time the vehicle is

started the previously stored mode will be recalled and

used.
General Information
The following regulatory statement applies to all Radio

Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and

with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:
1. This device may not cause harmful interference.

2. This device must accept any interference received, in-

cluding interference that may cause undesired opera-

tion.

NOTE:

Changes or modifications not expressly approved

by the party responsible for compliance could void the

user’s authority to operate the equipment.

Forward Collision Warning (FCW) Operation

The Forward Collision Warning (FCW) system provides

the driver with audible warnings, visual warnings (within

the instrument cluster display), to warn the driver when it

detects a potential frontal collision. The warnings are

intended to provide the driver with enough time to react,

avoid or mitigate the potential collision.
NOTE:

FCW monitors the information from the forward

looking sensors as well as the Electronic Stability Control

(ESC) System, to calculate the probability of a forward

collision. When the system determines that a forward

collision is probable, the driver will be provided with

audible and visual warnings.

SAFETY

141

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands