Dodge Challenger 2018 Owner'S Manual Download Page 151

Page: 151 / 512

4. For each subsequent ignition key cycle, a chime will

sound, the “TPMS Telltale Light” will flash on and off

for 75 seconds and then remain on solid, and the

instrument cluster will display a “Service Tire Pressure

System” message for five seconds and then display

dashes (- -) in place of the pressure value.

5. Once you repair or replace the original road tire and

reinstall it on the vehicle in place of the compact spare or

non-matching full size, the TPMS will update automati-

cally. In addition, the “TPMS Telltale Light” will turn off

and the graphic in the instrument cluster will display a

new pressure value instead of dashes (- -), as long as no

tire pressure is below the low-pressure warning limit in

any of the four active road tires. The vehicle may need to

be driven for up to 20 minutes above 15 mph (24 km/h)

in order for the TPMS to receive this information.

TPMS Deactivation — If Equipped

The TPMS can be deactivated if replacing all four wheel

and tire assemblies (road tires) with wheel and tire assem-

blies that do not have TPMS Sensors, such as when

installing winter wheel and tire assemblies on your vehicle.
To deactivate the TPMS, first replace all four wheel and tire

assemblies (road tires) with tires not equipped with Tire

Pressure Monitoring (TPM) Sensors. Then, drive the ve-

hicle for 20 minutes above 15 mph (24 km/h). The TPMS

will chime, the

⬙

TPM Telltale Light

⬙

will flash on and off for

75 seconds and then remain on. The instrument cluster will

display the “Service Tire Pressure System” message and

then display dashes (--) in place of the pressure values.
Beginning with the next ignition cycle, the TPMS will no

longer chime or display the “Service Tire Pressure System”

message in the instrument cluster but dashes (--) will

remain in place of the pressure values.
To reactivate the TPMS, replace all four wheel and tire

assemblies (road tires) with tires equipped with TPM

sensors. Then, drive the vehicle for up to 20 minutes above

15 mph (24 km/h). The TPMS will chime, the

⬙

TPM Telltale

Light

⬙

will flash on and off for 75 seconds and then turn off.

The instrument cluster will display the “Service Tire Pres-

sure System” message and then display pressure values in

place of the dashes. On the next ignition cycle the

⬙

Service

Tire Pressure System

⬙

message will no longer be displayed

as long as no system fault exists.

SAFETY

149

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands