Dodge Challenger 2018 Owner'S Manual Download Page 439

Page: 439 / 512

Setting Name

Selectable Options

Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote

Start

1st Press Of Key Fob Un-

locks

Driver Door

All Doors

NOTE:

•

When

⬙

Driver Door

⬙

is selected with 1st Press Of Key Fob Unlocks, only the driver’s door will unlock with the first

press of the key fob unlock button. You must press the key fob unlock button twice to unlock the passenger’s

doors. When

⬙

All Doors

⬙

is selected for 1st Press Of Key Fob Unlocks, all doors will unlock on the first press of the

key fob unlock button.

•

If the vehicle is programmed 1st Press Of Key Fob Unlocks “All Doors,” all doors will unlock no matter which

Passive Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks “Driver Door” is programmed,

only the driver’s door will unlock when the driver’s door is grasped. With Passive Entry, if 1st Press Of Key Fob

Unlocks “Driver Door” is programmed, touching the handle more than once will result in only the driver’s door

opening. If “Driver Door” is selected, once the driver door is opened, the interior door lock/unlock switch can be

used to unlock all doors (or use key fob).

Passive Entry — If

Equipped

NOTE:
The “Passive Entry” feature allows you to lock and unlock the vehicles door(s) without having to push the key fob

lock or unlock buttons. To make your selection, press the “Passive Entry” button on the touchscreen, until a check-

mark appears next to the setting, showing that the setting has been selected.

MULTIMEDIA

437

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands