Dodge Challenger 2018 Owner'S Manual Download Page 56

Page: 56 / 512

Heated Mirrors — If Equipped

These mirrors are heated to melt frost or ice. This

feature will be activated whenever you turn on the

rear window defroster (if equipped). Refer to “Climate

Controls” in “Getting To Know Your Vehicle” for further

information.

Illuminated Vanity Mirrors

An illuminated vanity mirror is on the sun visor. To use the

mirror, rotate the sun visor downward and swing the

mirror cover upward. The light turns on automatically.

Close the mirror cover to turn off the light.

Illuminated Vanity Mirror

54 GETTING TO KNOW YOUR VEHICLE

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands

Dodge Challenger 2018, Owner'S Manual

Search results

Summary of Contents for Challenger 2018

Reviews:

Related manuals for Challenger 2018

Brands by name

Popular brands