Dodge Challenger 2018 Owner'S Manual Download Page 255 | Manualshive

Page: 255 / 512

background image

VEHICLE LOADING

The load carrying capacity of your vehicle is shown on the

“Vehicle Certification Label”. This information should be

used for passenger and luggage loading as indicated.
Do not exceed the specified Gross Vehicle Weight Rating

(GVWR) or the Gross Axle Weight Rating (GAWR).

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to the

drivers side B-Pillar or the rear of the driver’s door.
The label contains the following information:

•

Name of manufacturer

•

Month and year of manufacture

•

Gross Vehicle Weight Rating (GVWR)

•

Gross Axle Weight Rating (GAWR) front

•

Gross Axle Weight Rating (GAWR) rear

•

Vehicle Identification Number (VIN)

•

Type of vehicle

•

Month, Day, and Hour of manufacture (MDH)

The bar code allows a computer scanner to read the VIN.

Gross Vehicle Weight Rating (GVWR)

The GVWR is the total allowable weight of your vehicle.

This includes driver, passengers, and cargo. The total load

must be limited so that you do not exceed the GVWR.

Gross Axle Weight Rating (GAWR)

The GAWR is the maximum capacity of the front and rear

axles. Distribute the load over the front and rear axles

evenly. Make sure that you do not exceed either front or

rear GAWR.

WARNING!

Because the front wheels steer the vehicle, it is impor-
tant that you do not exceed the maximum front or rear
GAWR. A dangerous driving condition can result if
either rating is exceeded. You could lose control of the
vehicle and have a collision.

6

STARTING AND OPERATING 253

«
...
253
254
255
256
257
...
»

Summary of Contents for Challenger 2018

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Challenger 2018

Brand: Jeep Pages: 608

QuadraTop Adventure Top S

Brand: Quadratec Pages: 20

Brand: TBC Pages: 12

Sedan CIVIC 2022

Brand: Honda Pages: 701

Brand: Cadillac Pages: 20

PRIME DESIGN HRR-369-E-UM3-96

Brand: Safe Fleet Pages: 12

Brand: Kocchi's Pages: 4

Brand: Discount Car Stereo Pages: 8

A-18 TRAILER ABS

Brand: BENDIX Pages: 40

Brand: Toyota Pages: 56

Brand: Enduro Pages: 52

Brand: Acura Pages: 19

Brand: Ford Pages: 325

Brand: DRAGONFIRE Pages: 4

Brand: Tesla Pages: 42

Brand: chinavasion Pages: 3

Brand: Prorack Pages: 15

Giulia 952 2017

Brand: Alfa Romeo Pages: 324

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands