Docomo STYLE N-02A, Instruction Manual

Page: 569 / 602

20
d
To check the COM port on Windows 2000
1
Open " スタート " (Start) → " 設定 " (Settings) → " コントロールパネル " (Control
Panel)
2
Open " 電話とモデムのオプション "
(Telephone and modem options) in
Control Panel
3
If the "
所在地情報
" (Address information) screen appears, enter "
市外局番
" (Area Code) and click "OK"
4
Click the "
モデム
" (Modem) tab to
confirm the COM port of the " 接続
先 " (Access point) column of
"FOMA N02A" and click "OK"
The COM port confirmed here will be used in the
access point (APN) set up (p.20).
The contents displayed on the screen and the
COM port number differ depending on the PC.
Setting up the access point (APN)
Communication software to enter AT commands is required for the settings. This section describes
how to set it up using "Hyper terminal" that comes with Windows.
d
Windows Vista is not compatible with "Hyper terminal". For Windows Vista, set with compatible
software. (Follow the instructions for the setting of the software.)
Access points <APN/cid>
d
Normal telephone numbers are not used for access points for packet communication unlike 64K data
communication. Set up APN instead of a telephone number for connection.
d
The APN setting is just like registering a Phonebook for packet communication from a PC. Assign
registration number (cid) 1 through 10 to register, which is used as a part of the access point number.
As the APN of mopera "mopera.ne.jp" is assigned to cid1 and APN of mopera U "mopera.net" to cid3
by default, assign the APN to cid2 or between cid4 to cid10.
*1
Default setting cid1 ： mopera.ne.jp cid3 ： mopera.net cid2, 4 to 10 ： not set