Docomo STYLE N-02A, Instruction Manual

Page: 104 / 602

102
Sou
nd/Screen/Light Se
ttings
2 Highlight an item to set
X
o
(Edit)
3 Select any item:
Time setting …… Enter time to set or release
automatically.
Repeat
……
Select 1 time/Daily ( )/Select
day ( ).
4
o
(Finish)
● When auto manner mode is set
z
The following icons appear on the standby screen:
: Auto start is set
: Auto release is set
: Auto start is set/Remote monitoring
z
When manner mode is set by pressing
q
(1 second or longer), the manner mode is released
at the auto release time.
z
When manner mode is set by auto start, the
manner mode can be released by pressing
q
(1 second or longer).
Manner start (release) time list
screen (p.101)/Manner start
(release) time detail screen
(p.101)
Edit
Display detail
*
……
Display the setting.
Finish (Set this) …… Set the setting.
Release this
……
Release a setting.
Release all …… Release all the settings.
*: Available only on the Manner start (release) time list
screen.
[Table 1] When manner mode is set
N
z
This function does not work at the specified time if
the power is off.
z
The manner mode is not set/released
automatically at the specified time while another
function is active. Set/Released after the function
exits.
Item
Manner
mode
Super
silent
Original
(Original manner mode settings)
Record message activation “Record message”
(p.67) setting “Record message” setting
Vibrator ON “Vibrator” setting
Ring volume for voice/videophone call,
PushTalk call and 64K data
communication Silent “Phone vol.” setting
Ring volume for mail, chat mail, packet
communication, MessageR/F, i-concier
information and i-
α
ppli call
Silent “Mail vol.” setting
Alarm volume (including snooze function) Silent “Alarm vol.” setting
Wake-up tone Silent “Phone vol.” setting
Played at “Level 2” when set to “Step”
i-
α
ppli volume, i-Widget sound effect Silent “i-
α
ppli vol.” setting
Alarm volume for Schedule, To Do List,
Booking program/Timer recording, and
Cost limit Silent “Phone vol.” setting
Confirmation, activation and completion
tones for Voice memo, Record message,
etc. ON OFF “VM tone” setting
Keypad sound OFF “Keypad sound” setting
Microphone sensitivity during calls Up “Mic sensitivity” setting