Docomo STYLE N-02A, Instruction Manual

Page: 102 / 602

100
Sou
nd/Screen/Light Se
ttings
Setting the Open-Close
Sound
<Open-Close sound>
Set sound to be played when the FOMA terminal is
opened or closed.
1
i
X
“Settings/Service”
X
“Other
settings”
X
“Open-Close sound”
X
“Open sound” or “Close sound”
2 Select any item:
Melody …… Select open-close sound from the
Melody folder.
Ring time …… Select the ring time of open-close
sound.
OFF
Setting the Confirmation Tone
for Charging
<Charge sound>
Emit a short double-beep (“bibip”) when charging
starts and ends.
z
When the standby screen is not displayed or when
Manner mode or Public mode (Driving mode) is
set, the charge sound is not played.
1
i
X
“Settings/Service”
X
“Other
settings”
X
“Charge sound”
X
“ON”
or “OFF”
Setting the Clock Alarm Tone
<Clock Alarm Tone set>
Change the clock alarm tone for Alarm, Schedule, To
Do list and Booking program.
1
i
X
“Settings/Service”
X
“Clock”
X
“Clock Alarm Tone set”
X
Select
an alarm tone
Select “Melody”/“i-motion”/“Music”/“Voice
announce”/“OFF”.
Alarming You before the Line
is Disconnected
<Quality alarm>
Emit an alarm tone to warn you that the signal quality
is deteriorating and the line is likely to be
disconnected.
z
The line may be disconnected without the alarm
tone if the signal quality deteriorates quickly.
1
i
X
“Settings/Service”
X
“Talk”
X
“Quality alarm”
X
Select an alarm
tone
Select “No tone”/“High tone”/“Low tone”.
Setting the Ring Time for
Incoming Mail
<Mail/Msg. ring time>
Set ring time of the ring tone played when you receive
mail, chat mail, MessageR/F or i-concier information.
1
i
X
“Settings/Service”
X
“Incoming call”
X
“Mail/Msg. ring
time”
X
Select an item to set ring
time
When “Mail” is selected, the ring time for i-mode
mail, Area Mail and SMS is set.
2 “ON”
X
Enter ring time (2 digits
from 01 to 30 seconds)
■
To turn off the ring tone
X
“OFF”
When “Vibrator” is activated, the vibration is
disabled.
N
z
The volume of open-close sound cannot be
adjusted.
z
The open-close sound does not play when the
i-motion or i-
α
ppli is set as the standby screen.