Docomo STYLE N-02A, Instruction Manual

Page: 210 / 602

208
i-mod
e/i-motion/i-Channel/
i-concier
●
To display from a screen other than
the standby screen
When “Receiving setting” under “Mail Setting” is set
to “Alarm preferred”, the “Received information”
screen appears if information is received while the
standby screen is not displayed.
1 Receive information automatically
The “Received information”
screen appears.
2
d
The i-concier screen appears.
Setting i-concier
Configure i-concier settings.
Configure the information display
setting for the standby screen
<Information display>
Set whether to display a pop up message on the
standby screen when information is received.
1
i
X
“Settings/Service”
X
“Display”
X
“Information display”
X
“ON”
A pop up message appears to show the
information.
■ To not display information on the standby
screen
X
“OFF”
Setting the i-concier ring tone
<Select ring tone>
Set the ring tone, illumination and vibrator for
information reception.
z
Ring volume setting → p.63
z
Ring tone setting → p.96
z
Ring time setting → p.100
z
Vibrator setting
→
p.98
z
Illumination setting → p.110
Setting information reception
<Receive information setting>
Configure information reception settings. The settings
include train information, traffic information,
earthquake information, local event information, etc.
Only specified information can be viewed. You can
also set reception stop/resume, reception hours, etc.
or check the current settings.
1
i-concier screen (p.206)
X
o
(MENU)
X
Select
2 Select “
インフォメーション受信設
定
” (Information receive settings)
3 Configure the settings
z
When Original lock is set on “i-concier” under
“Data disp. edit del.” and information is received,
the popup message “Receiving new information”
appears on the standby screen. When the popup
message is selected, the i-concier screen appears
regardless of the content.
N
z
When “Receiving setting” under “Mail Setting” is
set to “Operation preferred”, a pop up message
does not appear on the screen and incoming
operations (ring tone, vibrator, illumination
flashing) are not performed even if information is
received while the standby screen is not
displayed. “
” appears at the top of the screen.
N