Docomo STYLE N-02A, Instruction Manual

Page: 567 / 602

18
Setting up Dial-up Network
This section describes how to set up a dial-up connection for packet communication / 64K data
communication without using DOCOMO Connection Manager. The flow of operation is described
below.
d It is unnecessary to set up the dial-up network for 64K data communication. Go on to "Setting up Dial-
up" (p.24).
About AT commands
d
AT commands are commands for modem control. The FOMA terminal complies AT commands and
supports some enhanced commands and its own AT commands.
d
Entering an AT command allows you to set or confirm (display) the detail settings and the contents of
the settings for the "Data communication" and FOMA terminal.
Checking the COM port
d
To set up the access point (APN), you need to specify the COM port number assigned to "FOMA
N02A" (Modem) built in after installing the FOMA communication setting file (drivers). This section
describes how to confirm the COM port number. The COM port confirmed here will be used in the
access point (APN) set up (p.20).
d
Preparation
1
Connect the FOMA USB Cable with Charge Function 01/02 (optional) to the
FOMA terminal
2
Turn on the FOMA terminal, then connect the FOMA USB Cable with Charge
Function 01/02 connected to the FOMA terminal to your PC
d
To check the COM port on Windows Vista
1
Open " "
→
"
コントロールパネル
" (Control Panel)
2
Open " ハードウェアとサウンド " (Hardware and Sound) → " 電話とモデムの
オプション
" (Telephone and modem options) in Control Panel
3
If the "
所在地情報
" (Address information) screen is displayed, enter "
市外局
番／エリアコード " (Area code) and click "OK"
4
Click the " モデム " (Modem) tab to
confirm the COM port of the " 接続
先
" (Access point) column of
"FOMA N02A" and click "OK"
The COM port confirmed here will be used in the
access point (APN) set up (p.20).
The contents displayed on the screen and the
COM port number differ depending on the PC.