Docomo STYLE N-02A, Instruction Manual

Page: 76 / 602

74
Voice/Vi
deophone Calls/P
ushTalk
PushTalk
PushTalk is an all-new communications service that
allows a group of up to five people to talk to each
other at once. Press the PushTalk key to talk.
* PushTalk communications charges apply each time you
press the key (talk).
z
For details on PushTalk and compatible models,
refer to the NTT DOCOMO website or “Mobile
Phone User’s Guide [Network Services]”.
● PushTalk plus
* A separate subscription is required
PushTalk plus is a PushTalk communications service
that allows a group of up to 20 people to talk to each
other at once. This service enhances PushTalk by
providing a shared phonebook on the network, or a
view of the status of members.
z
For details about operations, refer to the brochure
you received at subscription.
Making a PushTalk Call
<PushTalk dial>
1 Enter a phone number
X
@
• When the other party
answers the call, a tone
beeps, and the “PushTalk
talking” screen appears.
• The other party’s voice
comes from the speaker.
■ To talk with more than
one party
Make a call using the
PushTalk phonebook.
→ p.79
■ To release handsfree
X
o
( )
You can set “Hands-free setting” (p.81) to not
answer calls using handsfree.
2
Hold down
@
while you talk
• When you obtain the right to speak, a tone beeps,
and you can speak.
• While another party is talking, you cannot obtain
the right and an error tone sounds.
• When
@
is released, a tone sounds, and another
member can speak.
• When a flat-plug earphone/microphone with
switch (optional) is connected, you can speak by
holding down the switch of the earphone/
microphone.
• When a member leaves a PushTalk conversation
(ends the call), a tone sounds.
■ Adding members
Even after a PushTalk call has started, you can
still call and add members.
→
p.76
3 To end the call, press
y
Other parties hear the tone.
■ To rejoin a PushTalk call
Even if you end a call, you can rejoin the call if
other parties continue the call.
→
p.75
PushTalk talking
N
<Dial>
z
You can also make PushTalk calls using the
regular phonebook, Redial/Dialed calls/Received
calls, or Phone To.
“PushTalk Redial/Dialed calls/Received calls”
→ p.75
z
The Caller ID setting for PushTalk calls is in accord
with the “Caller ID Notification” (p.46) setting.
z
When “Set Caller ID” is set to “ON” and a call is
made, each member who receives the call is
notified of all the other members’ phone numbers.
When set to “OFF”, “User unset” appears on the
PushTalk talking screen of all members who
received the call.
z
A PushTalk call cannot be made during a voice
call, videophone call, or data communication.
z
If a PushTalk call is made during i-mode, the
i-mode communication is disconnected. Also, if a
PushTalk call is made while i-
α
ppli is running, the
i-
α
ppli stops.
z
When a videophone or another PushTalk call, or
64K data communication arrives during a
PushTalk call, the new call is recorded in
Received calls, and the current PushTalk call
remains connected.
z
Speaking time is limited with each right to speak.
When the time draws to an end, the speech right
release notice tone sounds and a message
appears indicating that the duration is almost over.
When the duration is over, the speech right will end.
z
If the PushTalk button is not pressed by any
member of the group (if nobody speaks) for a
given time, the connection is automatically cut.
z
The speaker will bear PushTalk communications
charges when the speaker presses
@
and a tone
beeps (charges apply every time he/she obtains
the right to speak).
z
Emergency calls (110, 119 and 118) cannot be
made using PushTalk.
z
The Outgoing number selection screen appears
when the 2in1 is in Dual mode. Select “Number A”.
z
PushTalk calls cannot be made when 2in1 is in
B mode.