Docomo STYLE N-02A, Instruction Manual

Page: 140 / 602

138
Security
Settings
Muting Ring Tones for Callers
Not in the Phonebook
<Ring time (sec.)>
Set the mute period for the ring tone for voice/
videophone calls from phone numbers not in the
FOMA terminal (Phone) phonebook or UIM
phonebook (Set mute seconds). Prevent accidentally
dialing numbers from Received calls, such as
nuisance calls that only ring for a short period.
z
“Set mute seconds” also works when you receive a
voice, videophone or PushTalk call without caller ID
or when there is another incoming call during a
voice, videophone or PushTalk call.
z
You cannot set “Set mute seconds” when “Reject
unknown” is set to “Reject”.
1
i
X
“Settings/Service”
X
“Incoming call”
X
“Ring time
(sec.)”
X
Select any item:
Set mute seconds
ON …… Enter the first silent seconds (01 to 99
seconds).
OFF
……
Set the first silent seconds to 0
seconds.
Missed calls display …… Set whether to record
incoming calls for which no ring tone sounds to
Missed calls, or to display the desktop icon.
Rejecting Calls from Callers
Not in the Phonebook
<Reject unknown>
Set whether to accept or reject calls from callers not
in the phonebook of the FOMA terminal (Phone) or
the FOMA card (UIM).
z
This function is valid for only calls with caller ID. It is
recommended that you also set “Caller ID Request”
and “Call setting w/o ID”.
z
You cannot set “Reject unknown” when “Set mute
seconds” under “Ring time (sec.)” is set to “ON”.
1
i
X
“Settings/Service”
X
“Lock/
Security”
X
“Reject unknown”
X
Enter your security code
X
“Reject” or “Accept”
z
When you receive a call from a phone number set
to “Reject”, the call is rejected even when “Voice
Mail” or “Call Forwarding” service is set to
“Activate”. If the power is off or when “
” is
displayed, or if the ringing time set for “Voice Mail”
or “Call Forwarding” is 0 (zero) seconds, “Voice
Mail” or “Call Forwarding” service is enabled.
z
i-mode mail and SMS are received regardless of
this option.
N
z
When you receive a call from a caller stored as
secret data in the phonebook, only the phone
number is displayed with “Set mute seconds” as 0
seconds.
N
z
If the mute time is longer than the ringing time for
Record message, Record message is activated
without ringing first. To activate Record message
after ringing, set the ringing time for Record
message longer than the mute time. The same
applies to ringing times for Voice Mail, Call
Forwarding and Auto answer.
N
z
When you receive a call from a caller stored as
secret data in the phonebook, the call is not
rejected regardless of this setting.
z
When this option is set to “Reject”, the caller hears
the busy tone even if “Voice Mail” or “Call
Forwarding” service is activated. Note that if the
power is off or when “
” is displayed, or if the
ringing time set for “Voice Mail” or “Call
Forwarding” is 0 (zero) seconds, the busy tone is
not heard, and “Voice Mail” or “Call Forwarding” is
enabled.
z
i-mode mail and SMS are received regardless of
this option.
N