1592015820 User manual IC260_261L_D DUO FW1.9 rel. 1.0
Pag. 14 of 149
Celsius degrees: ON for temperature measurements of probe values or parameters
Fahrenheit degrees: ON for temperature measurements of probe values or parameters
Bar: ON for pressure measurements of probe values, setpoint or parameters
PSI
Psi: ON for pressure measurements of probe values, setpoint or parameters
ON = compressor 1 active
Blinking = compressor 1 delay counting
ON = compressor 2 active
Blinking = compressor 2 delay counting
ON = compressor 3 active
Blinking = compressor 3 delay counting
ON = compressor 4 active
Blinking = compressor 4 delay counting
ON = compressor 5 active
Blinking = compressor 5 delay counting
ON = compressor 6 active
Blinking = compressor 6 delay counting
General alarm: blinking if there is an alarm not identified by an icon
Anti freeze heaters/ integration heating / boiler: ON if the output is on
Flow alarm/ (differential) pressure switch / supply fan thermal (air / air unit) : is blinking if
the configuration of the digital input is active
Real time clock: On when the bottom display show the RTC
ON during the programming with time based parameter value
In function menu indicates the defrost delay counting
Water pump: On if at least one of the four configurable pump group is on
Condenser fan: ON if at least one of the PWM or relay outputs for fan control is active
