DLE28-MA User’s Guide
5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access
DLE28-MA Local Management. It also explains how to use the Local
Management screens and commands.
5.1
OVERVIEW
Local Management for the DLE28-MA consists of a series of
management screens that allow the management of the module, the
attached segments and the DLM6C-AA chassis. The management screens
allow the user to perform the following tasks:
•
Manage any interface module in the chassis via a connection to a
single interface module.
•
Assign IP addresses and subnet masks to the DLE28-MA and the
DLM6C-AA chassis.
•
Control access to the DLE28-MA and the DLM6C-AA chassis by
establishing community names.
•
Download a new image of operating software.
•
Designate which Network Management Workstations receive SNMP
traps from the DLE28-MA and the DLM6C-AA chassis.
•
Monitor the environmental status of the DLM6C-AA chassis.
•
View switch, interface, and RMON statistics.
•
Assign ports to operate in standard or full duplex mode.
•
Enable trunking of ports to perform load sharing.
•
Configure the Fast Ethernet Interface Modules of the DLE28-MA.
There are three ways to access Local Management:
The Local Management screens shown in this chapter are for
the DLE28-MA. All Local Management functions specific to any
of the interface modules are preceded by a Note to alert the
reader.
