Chapter 5: Local Management
5-26
DLE28-MA User’s Guide
To establish community names, proceed as follows:
1.
Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
2.
Enter the password in the field (maximum 31 characters).
3.
Press ENTER.
4.
Repeat steps 1 through 3 to modify the other community names.
5.
Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message “SAVED OK” displays. The community
names are saved to memory and their access modes implemented.
All passwords assigned in the DLM6C-AA SNMP Community
Names screen allow access to both DLM6C-AA Local
Management screens, and the Local Management screens of
the interface modules that are installed in the chassis. To
configure the interface module to not allow access to
DLM6C-AA Local Management screens refer to Section 5.16.
