Chapter 5: Local Management
5-80
DLE28-MA User’s Guide
Figure 5-28
High Speed Interface Configuration Screen for the DLE28-MA
The following briefly explains each field of the High Speed Interface
Configuration screen.
Port Type (Read-Only)
Displays the name of the interface (DELFX-UI, DELTX-UI or
DELF3-UI3) installed in ports 25 and 26. Figure 5-28 shows that there is
a DELTX-UI interface installed in port 25 and no interface, indicated by
Unknown, in Port 26.
Link Status (Read-Only)
Indicates whether or not there is a physical connection from this port to
another 10BASE-T or 100BASE-TX/FX device. One of the following
values is displayed:
•
Link – There is a link signal present and a valid physical connection to
another 10BASE-T or 100BASE-TX/FX device.
•
No Link – There is no link signal present and there is no valid physical
connection to another device.
Firmware Revision: XX.XX.XX
High Speed Interface Configuration
LKG-10827-98F
BOOTPROM Revision: XX.XX.XX
Port 25
FE-100TX
Link
100Base-TXFD
[Auto-Negotiation]
[100Base-TXFD]
[Disabled]
RETURN
Module Type: DLE28-MA
Slot Number: X
MS 700 LOCAL MANAGEMENT
Event Message Line
SAVE
Port Type
Link Status
Current Oper. Mode
Desired Oper. Mode
Advertised Ability
Port 26
Unknown
No Link
[N/A]
[N/A]
[N/A]
EXIT
