SmartTrunk and the Configuration Screen
DLE28-MA User’s Guide
5-71
Figure 5-25
SmartTrunk Configuration Screen
The following explains each field of the SmartTrunk Configuration
screen:
Port # (Read-only)
Identifies the number of the port.
Port Name (Read-only)
These are the names assigned, by DIGITAL, for all switching interfaces.
Connection (Toggle)
Enables the connection type for the interface. This field toggles between
USER and NETWORK. USER is not used for load sharing; NETWORK
is used for load sharing. At least two ports must be designated as
NETWORK to perform load sharing.
Smart Trunk State (Read-only)
Displays the current operating state of the port — NONE, BLOCKING,
or SMARTTRUNKING:
•
NONE means that the port is operating as a normal switch port.
Firmware Revision: XX.XX.XX
Smart Trunk Configuration
LKG-10824-98F
BOOTPROM Revision: XX.XX.XX
Module Type: DLE28-MA
Slot Number: X
MS 700 LOCAL MANAGEMENT
Event Message Line
Port # Port Name Connection Smart Trunk State
Instance # STPorts
1 Enet [USER]
NONE
0
0
2 Enet [NETWORK] SMARTTRUNKING
1 2
3 Enet [NETWORK] SMARTTRUNKING
1 2
4 Enet [NETWORK] SMARTTRUNKING 2 3
5 Enet [NETWORK] SMARTTRUNKING 2 3
6 Enet [NETWORK] SMARTTRUNKING 2 3
7 Enet [USER] NONE 0 0
8 Enet [USER] NONE 0 0
9 Enet [USER] NONE 0 0
10 Enet [USER] NONE 0 0
11 Enet [USER] NONE 0 0
12 Enet [USER] NONE 0 0
RETURN
ENABLE
NEXT
EXIT
---------
------------------ ---------------
-------------------------
-------------
-------------
