Chapter 5: Local Management
5-86
DLE28-MA User’s Guide
toggles between YES and NO. If YES is selected, the module reboots
after the download is completed. If NO is selected the module continues
using the existing the firmware image. The module stores the new
firmware image in FLASH memory. When the module or DLM6C-AA
chassis is reset, or during the next power-up, the module will boot from
FLASH memory using the new image.
TFTP Gateway IP Addr (Modifiable)
This field shows the IP address of the TFTP gateway server defined in the
General Configuration screen in Section 5.15.4, Setting the TFTP
Gateway IP Address.
Last Image Server IP (Read-only)
This field shows the IP address of the server used for the previous FLASH
Download.
Last Image File Name (Read-only)
This field shows the complete path and file name of the last image
downloaded to FLASH.
If TFTP or RUNTIME is selected as the download method (Figure 5-29),
the following two additional fields appear:
Download Server IP (Selectable)
The IP address of the TFTP server to be used for the FLASH download
is entered in this field.
Download File Name (Selectable)
The complete TFTP Server path and file name of the new image is
entered in this field.
5.24.1
Image File Download Using TFTP
To download a new firmware image to the FLASH memory of the
DLE28-MA using TFTP proceed as follows:
1.
Use the arrow keys to highlight the Download Method field.
2.
Use the SPACE bar to select TFTP.
