General Configuration Screen
DLE28-MA User’s Guide
5-55
Figure 5-20
Clear NVRAM Warning Screen
5.
Use the arrow keys to highlight YES and press ENTER. The message
“CLEARING NVRAM. REBOOT IN PROGRESS...” displays.
The DLE28-MA clear NVRAM and reboot. All user-entered parameters
default to factory settings.
5.15.14 Enabling/Disabling IP Fragmentation
To enable or disable IP fragmentation, proceed as follows:
1.
Use the arrow keys to highlight the IP Fragmentation field.
I
If the DLE28-MA is being bridged to an FDDI ring (for example,
via a DELHF-UA) IP Fragmentation should be enabled. If IP
Fragmentation is disabled, all FDDI frames that exceed the
maximum Ethernet frame size will be discarded.
WARNING
174251
YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEAR
ALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TO
IP ADDRESS, INTERFACE CONFIGURATION, AND COM PORT
CONFIGURATION, THEN RESET THE BOARD.
ARE YOU SURE YOU WANT TO CLEAR NVRAM?
YES
NO
