Using the RESET Button
DLE28-MA User’s Guide
4-7
4.4
USING THE RESET BUTTON
The RESET button located near the upper plastic locking tab of the
module (refer to Figure 4-3) resets the DLE28-MA processor without
affecting the NVRAM.
Figure 4-3
RESET Button
To reset the DLE28-MA processor, press and release the RESET button.
The module processor goes through a reset process of approximately 20
seconds. Additional module downtime may be added as the module
reenters the network.
Pressing the RESET button resets the device, and all current
switching being performed by the device is halted. A module
downtime of up to two minutes will result from this action.
Ethernet
Reset Button
LKG-10983-98F
DLE28-MA
