Chapter 5: Local Management
5-56
DLE28-MA User’s Guide
2.
Press the SPACE bar to choose either ENABLED or DISABLED.
3.
Use the arrow keys to highlight the SAVE command.
4.
Press ENTER. The Event Message Line at the top of the screen
displays “SAVED OK”.
5.16
SNMP COMMUNITY NAMES SCREEN
The SNMP Community Names menu item allows the user to set
Local/Remote Management community names. Community names act as
passwords to Local/Remote Management and are agents of security
access to the DLE28-MA. Access to the DLE28-MA is controlled by
enacting any of three different levels of security authorization (read-only,
read-write, and super-user).
To access the SNMP Community Names screen from the Module
Configuration Menu screen, use the arrow keys to highlight the SNMP
COMMUNITY NAMES menu item and press ENTER. The SNMP
Community Names screen, Figure 5-21, displays.
If the DLM6C-AA has been assigned community names, it is
not necessary to assign community names to the individual
modules installed in the chassis unless the user wishes to limit
access to DLM6C-AA chassis screens by assigning different
community names to the module. When this is done access is
limited to the screens specific to the module to which the
terminal is attached and the Local Management session begins
at the Module Menu screen.
Super-User access gives the user full management privileges,
allows existing passwords to be changed, and all modifiable
MIB objects for the Container MIB and Internet MIB-II to be
accessed.
