SmartTrunk and the Configuration Screen
DLE28-MA User’s Guide
5-73
5.20.3
Enabling the Connection
To enable the Connection type, proceed as follows:
1.
Use the arrow keys to highlight the Connection field for the selected
port(s).
2.
Press the SPACE bar to select USER or NETWORK. Select
NETWORK if the port will be used for SmartTrunking. Select USER
if the port will NOT be used for SmartTrunking.
3.
Use the arrows keys to highlight the ENABLE command at the bottom
of the screen.
4.
Press ENTER. The message “SAVED OK” displays.
5.20.4
Displaying the SmartTrunk Ports
There are three SmartTrunk screens. Each screen displays 12 ports. The
NEXT and/or PREVIOUS command is displayed at the bottom of the
screen, allowing the user to navigate to either the next or previous screen.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries is displayed.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries in the previous screen.
