System Resources Screen
DLE28-MA User’s Guide
5-77
5.22
SYSTEM RESOURCES SCREEN
The System Resources screen, Figure 5-27, provides information
concerning the processor, the amount of FLASH memory, DRAM, and
NVRAM that is installed and how much of that memory is available. This
screen also allows the user to monitor the current processor (switch)
utilization and the peak switch utilization.
To access the System Resources screen from the Module Specific
Configuration Menu screen, use the arrow keys to highlight the SYSTEM
RESOURCES menu item and press ENTER. The System Resources
screen displays.
Figure 5-27
System Resources Screen
The following briefly explains each field of the System Resources screen.
Module Uptime (Read-only)
The time in days/hours/minutes that the module has been continuously
running.
CPU Type (Read-only)
Indicates the microprocessor used in the DLE28-MA.
Firmware Revision: XX.XX.XX
System Resources
LKG-10826-98F
BOOTPROM Revision: XX.XX.XX
Flash Memory Installed : 4 MB
DRAM Installed: 16 MB
NVRAM Installed: XX KB
Available:
XXXXX Bytes
Available:
XXXXX Bytes
Available:
XXXXX Bytes
CPU Type: i960 HT 25Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
Module Type: DLE28-MA
Module Uptime: X Days XHrs XMins
MS 700 LOCAL MANAGEMENT
Event Message Line
SAVE
RETURN
RETURN
EXIT
