Chapter 3: Installation
3-10
DLE28-MA User’s Guide
2.
Insert one end of the SC connector into the DELFX-UI or DELF3-UI
installed in the DLE28-MA. See Figure 3-4.
3.
At the other end of the fiber optic cable, attach the SC connector to the
other device.
Figure 3-4
DELFX-UI and DELF3-UI Port
4.
Verify that a link exists by checking that the port RX LED is on
(flashing amber, blinking green, or solid green). If the RX LED is off
and the TX LED is not blinking amber, perform the following steps
until it is on:
!
Do not touch the ends of the fiber optic strands, and do not let
the ends come in contact with dust, dirt, or other contaminants.
Contamination of the ends causes problems in data
transmissions. If the ends become contaminated, blow the
surfaces with a canned duster. A fiber port cleaning swab
saturated with optical-grade isopropyl alcohol may also be used
to clean the ends.
25
26
FE-100FX
RX LED
TX LED
