Broadcast Suppression Screen
DLE28-MA User’s Guide
5-93
5.26
BROADCAST SUPPRESSION SCREEN
The Broadcast Suppression screen, Figure 5-31, allows the user to set a
desired limit of receive broadcast frames that are switched out to the other
ports.
To access the Broadcast Suppression screen from the Module Specific
Configuration screen, use the arrow keys to highlight the BROADCAST
SUPPRESSION menu item and press ENTER. The Broadcast
Suppression screen displays.
Figure 5-31
Broadcast Suppression Screen
The Broadcast Suppression screen may not be available if the
operational mode of the module has been set to 802.1Q
SWITCHING. Refer to your Release Notes to see what
operational modes support Broadcast Suppression. Refer to
Section 5.15.9, Setting the Operational Mode, for instructions
on configuring the operational mode of the module.
Any broadcast frames received above the desired threshold will
be dropped.
Firmware Revision: XX.XX.XX
Broadcast Suppression
LKG-10830-98F
BOOTPROM Revision: XX.XX.XX
PORT #
1
2
3
4
5
6
7
8
9
10
11
12
Time Since Peak
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
999:23:59
Peak Rate
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
Threshold
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
150000
Module Type: DLE28-MA
Slot Number: X
MS 700 LOCAL MANAGEMENT
Event Message Line
Total RX
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
12345678910
Reset Peak
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
RETURN
RETURN
SAVE
[13-24]
EXIT
