Chapter 5: Local Management
5-84
DLE28-MA User’s Guide
4.
Use the RIGHT-ARROW key to move across to the
Enabled/Disabled field to the right of the selection.
5.
Use the SPACE bar to select Enabled or Disabled. Press ENTER.
Continue this process until you have completed enabling or disabling
the advertised modes.
6.
Use the arrow keys to highlight the SAVE command. Press ENTER.
The message “SAVED OK” displays and Local Management saves
the changes to memory.
5.24
FLASH DOWNLOAD SCREEN
The Flash Download screen, shown in Figure 5-29, allows the user to
clear the information stored in the DLE28-MA FLASH memory and
download a new image file from a TFTP server.
Before downloading a new image to the module, load the image onto the
network TFTP server.
To Access the Flash Download screen from the Module Specific
Configuration Menu screen, use the arrow keys to highlight the FLASH
DOWNLOAD menu item and press ENTER. The Flash Download screen
displays.
The user may also force the download of a new image by
changing the position of Switch 6 located inside the module.
Refer to Section C.2, Setting the Mode Switch, for details.
For information on how to set up a workstation as a TFTP
server, refer to the specific workstation documentation.
