SNMP Traps Screen
DLE28-MA User’s Guide
5-59
5.17
SNMP TRAPS SCREEN
Since the DLE28-MA is a SNMP compliant device, it can send messages
to multiple Network Management Stations to alert users of status changes.
The SNMP Traps screen is shown in Figure 5-22.
To access the SNMP Traps screen from the Module Configuration Menu
screen, use the arrow keys to highlight the SNMP TRAPS field and press
ENTER. The SNMP Traps screen displays.
Figure 5-22
SNMP Traps Screen
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
It is only necessary to assign SNMP traps if the user desires
the traps to be sent to different addresses than those assigned
in Section 5.9, which details how to set SNMP Traps for the
DLM6C-AA chassis.
Firmware Revision: XX.XX.XX
SNMP Traps
LKG-10821-98F
BOOTPROM Revision: XX.XX.XX
Trap Community Name
public
public
public
public
public
public
public
public
Module Type: DLE28-MA
Slot Number: X
MS 700 LOCAL MANAGEMENT
Event Message Line
RETURN
SAVE
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
EXIT
