Accessing Local Management
DLE28-MA User’s Guide
5-7
5.4
ACCESSING LOCAL MANAGEMENT
Access to Local Management is controlled through the Password screen,
Figure 5-3. Whenever a connection is made to the DLE28-MA the
Password screen displays. Before continuing, the user must enter a
password which is compared to the previously stored passwords. The
level of access allowed the user depends on the password. To set or
change passwords refer to Section 5.8. The following steps describe the
procedure to access Local Management.
1.
Turn on the terminal. Press ENTER (this may take up to four times,
because the COM port of the DLE28-MA auto-senses the baud rate of
the terminal) until the DLM6C-AA Local Management Password
screen, Figure 5-3, displays.
Figure 5-3
Local Management Password Screen
2.
Enter the Password and press ENTER. The default Super-User access
password is “public” or press ENTER.
MS 700 Local Management
Enter Password:
LKG-10808-98F
Digital Equipment Corporation
(c) Copyright CABLETRON Systems, Inc, 1998
Event Message Line
