Delta AH500 series, Hardware Operation Manual

Page: 339 / 681

A H 5 0 0 H a r d w a r e a n d
Operation Manual
6 - 3 4
Force Description
O
n (X/Y)
Forcing the input contact or output contact selected ON
O
ff (X/Y)
Forcing the input contact or output contact selected OFF
Release (X/Y) Releasing the contact from the locked state
Release All Releasing all the contacts from the locked states
I
f an output contact in the program is forced ON or OFF, the output state of this contact will not be affected by
the program execution result.
*. If the online monitoring function is disabled, the contacts will not be automatically released from the locked
states. As a result, users have to check whether the contacts need to be released from the locked states after the
test is complete.
There are two ways to create a monitoring table.
U
sers can create a monitoring table online or offline.

Method 1
Click New Devices Table on the PLC menu, or
on the toolbar.

Method 2
Right-click Device Monitoring Table in the project management area, and click Add .
Type a table name in the
Add Monitor Table window, and then click OK . An item will
be
under Device
Monitor Table in the project management area. I
f users want to open the monitoring table, they can double
-
click the item. Besides, the
users can create several monitoring tables in
the
project, and the monitoring tables
created will be saved
with the project.